10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

Corrugated box is a widely used packaging product. With its superior performance and good processing performance, it has gradually replaced wooden boxes and other transportation packaging containers and become the main force of transportation packaging. In addition to protecting commodities and facilitating storage and transportation, it can also play a role in publicizing commodities. So what should we pay attention to when designing the layout of corrugated box? Let's take you to Shenzhen carton factory.

加大校對力度，瓦楞紙箱的版面多采用文字印刷，一般情況下瓦楞紙箱的版面錯誤容易被疏忽，經常是多一字或少一定或錯一字，一旦設計版面出現問題又未曾得到糾正，后果將不堪設想。校對時需要一一進行校對勘誤，嚴格把關。

Increase proofreading efforts. The layout of corrugated boxes is mostly printed with words. Generally, the layout errors of corrugated boxes are easy to be neglected, often more or less than a certain word or a wrong word. Once there are problems in the design layout and have not been corrected, the consequences will be unimaginable. During proofreading, proofreading and correction shall be carried out one by one, and strict control shall be carried out.

整體布局要合理，對瓦楞紙箱的整體版面布局要合理，防止頭重腳輕，字體大小要適中，比例協調，印刷部位適當，距離瓦楞紙箱的邊緣大于20mm。且大多數企業對瓦楞紙箱印刷質量的理解不全，在一定程度上忽視了包裝的適銷作用，字體選擇不當，比例失調，排版零亂，影響美觀。

The overall layout should be reasonable. The overall layout of the corrugated box should be reasonable to prevent top heavy and bottom heavy. The font size should be moderate, the proportion should be coordinated, the printing position should be appropriate, and the distance from the edge of the corrugated box should be more than 20mm. Moreover, most enterprises have incomplete understanding of the printing quality of corrugated boxes, ignoring the marketability of packaging to a certain extent, improper font selection, imbalance of proportion and disorderly typesetting, which affect the beauty.

瓦楞紙箱的印刷圖形標志應采取標準化，圖形印刷質量不僅僅只限于清晰易辨，更重要的是要看是否符合標準或法律法規中的相關規定。

The printed graphic signs of corrugated boxes should be standardized. The graphic printing quality is not only limited to clarity and legibility, but also depends on whether they comply with the relevant provisions of national standards or laws and regulations.

瓦楞紙箱版面設計應考慮適印性，因為瓦楞紙箱的印刷一般是三色印刷，對于需要套印的瓦楞紙箱。設應嚴格版面的位置及尺寸，以便套色準確。如果在一種顏色內部套印其它顏色，并且顏色之間要求不留空隙，設就要考慮企業印刷機的精度，使兩種顏色的版面進行疊加印刷，疊加部分的寬度為印刷機的印刷偏差。為避免瓦楞紙箱印刷糊版，在滿足用戶要求的情況下，盡量使陽字筆劃變細，陰字筆劃變粗，這樣就加大了筆劃之間的間隔，不容易造成印刷模糊現象。

The printability should be considered in the layout design of corrugated boxes, because the printing of corrugated boxes is generally three-color printing, and for corrugated boxes that need overprint. The position and size of the layout shall be strictly controlled in the design so that the color registration is accurate. If other colors are overprinted in one color, and no gap is required between colors, the accuracy of the enterprise printing press should be considered in the design, so that the layout of the two colors can be superimposed for printing, and the width of the superimposed part is the printing deviation of the printing press. In order to avoid the printing paste of corrugated box, under the condition of meeting the user's requirements, try to make the positive strokes thinner and the negative strokes thicker, which increases the interval between strokes and is not easy to cause printing blur.

以上就是為大家介紹的有關瓦楞紙箱廠家的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.je-performance.com

The above is the detailed introduction of corrugated box manufacturers. I hope it will be helpful to you If you have any questions, please contact us We will provide service for you with our attitude http://www.je-performance.com