10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

Attention should be paid to the recovery and maintenance of plastic pallets. According to the correct use of plastic pallets, they can not only give full play to their own effects, but also can prolong the service life of plastic pallets and reduce the purchase cost of plastic pallets.

托盤收回說，運用塑料托盤時，要注意幾點:

When using plastic pallet, we should pay attention to the following points:

放貨時應放置均勻，防止起貨時側傾。

The goods should be placed evenly to prevent the goods from rolling.

塑料托盤應輕放，防止受力不均勻和損壞。

Plastic tray should be placed with care to prevent uneven force and damage.

在運用運送設備時，要考慮貨品尺度的差異是否適合運用這個塑料托盤，防止尺度不合適，支撐塑料托盤。

In the use of transport equipment, we should consider whether the difference in the size of the goods is suitable for the use of this plastic pallet, to prevent the size is not appropriate, support the plastic tray.

當運用堆垛時，應考慮底部托盤的負載。

When stacking is used, the load of the bottom pallet should be considered.

標準托盤

Standard pallet

合理運用塑料托盤時，應將包裝組合在塑料托盤上，以滿意裝卸、運送和儲存的要求。恰當捆扎和包裝，運用機械裝卸，為了使塑料托盤經用，更好依據以下要求正確運用塑料托盤:

When the plastic pallet is used reasonably, the packaging should be combined on the plastic pallet to meet the requirements of loading, unloading, transportation and storage. In order to ensure the safe use of plastic pallets, it is better to use plastic pallets correctly according to the following requirements:

塑料托盤不該暴露在陽光下，防止老化，縮短運用壽命。

Plastic tray should not be exposed to the sun to prevent aging and shorten the service life.

禁止將塑料托盤從高處拋起，防止受到強烈沖擊，造成托盤破損開裂。

It is forbidden to throw the plastic tray from a high place to prevent the tray from being damaged and cracked due to strong impact.

禁止將貨品從高處扔進塑料托盤。合理確認貨品在托盤中的堆積方法。貨品應放置均勻，不該以偏心方法會集堆積和堆積。重型托盤應放在潤滑的表面或表面。

It is forbidden to throw goods into plastic pallets from high places. Confirm the stacking method of goods in pallets. The goods should be placed evenly and should not be accumulated and piled up in an eccentric way. Heavy duty pallets should be placed on lubricated surfaces or surfaces.

叉車或手動液壓轎車，叉車外的叉車在腳外側的叉車，叉的穿刺應該悉數進入托盤，順利地抬起托盤改動視點。叉不能沖擊標準托盤旁邊面，防止造成托盤決裂和開裂。

Forklift truck or manual hydraulic car, forklift outside the forklift truck on the outside of the foot, all the forks should be punctured into the pallet to smoothly lift the pallet and change the viewpoint. The fork should not impact the side surface of the standard pallet to prevent the pallet from cracking and cracking.

當運用托盤架時，有必要運用托盤托盤。承載力按貨架結構確認，禁止超載。

When using pallet rack, it is necessary to use pallet. The bearing capacity shall be confirmed according to the shelf structure, and overloading is prohibited.

關于車用托盤廠家http://www.je-performance.com就先介紹到這里了，相信大家在實際的工作中會用到相關知識，如果您有這方面的需要，歡迎前來選購。

About the manufacturer of vehicle pallet http://www.je-performance.com First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.