10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

瓦楞紙箱是由瓦楞紙板經過加工而成的。由多層瓦楞紙板組成的瓦楞紙板可以計算出五層瓦楞紙箱的重量

Corrugated box is made of corrugated board after processing. The weight of five-layer corrugated box can be calculated by corrugated board composed of multi-layer corrugated board

五層瓦楞紙箱是由五層瓦楞紙板自然組成，并不是楞紙板都有相同的重量。瓦楞紙板是由原紙組成的。瓦楞紙箱由面紙、瓦楞紙、芯紙、瓦楞紙、內紙五層組成。五張紙（如果瓦楞紙被攤開壓平，則為一張紙）。每張紙都有自己的重量，可以和機器結合在一起。因此，瓦楞紙箱有五層重量的多種組合。

Five layer corrugated box is a natural composition of five layer corrugated board, not all corrugated board have the same weight. Corrugated board is made of base paper. Corrugated box is composed of five layers: face paper, corrugated paper, core paper, corrugated paper and inner paper. Five sheets of paper (one sheet if the corrugated paper is spread out and flattened). Each paper has its own weight and can be combined with the machine. Therefore, corrugated boxes have a variety of combinations of five layers of weight.

五層紙板的尺寸也是決定重量的一個因素。盒子越大，自然使用的材料就越多，因此重量會增加，反之亦然。

The size of the five ply board is also a factor in determining the weight. The larger the box, the more materials are used naturally, so the weight increases, and vice versa.

好吧，如果你想知道五層瓦楞紙箱的重量，你應該先知道瓦楞紙箱的規格。如果您不知道，可以咨詢宏圖紙箱廠，說明您的目的。紙箱廠將樂于配合紙箱的規格，為客戶節省成本。

Well, if you want to know the weight of five layer corrugated box, you should know the specifications of corrugated box first. If you don't know, you can consult Hongtu carton factory to explain your purpose. Carton factory will be happy to cooperate with the specifications of cartons to save cost for customers.

瓦楞紙箱重量計算公式如下

The calculation formula of corrugated box weight is as follows

1.計算紙箱面積（總長度*總寬度）

1. Calculate carton area (total length * total width)

總長度=（紙箱長度+紙箱寬度）*2+接頭（一艘駁船）

Total length = (carton length + carton width) * 2 + joint (one barge)

總長度=（箱長+箱寬+接頭）*2（雙燈箱）

Total length = (box length + box width + joint) * 2 (double light box)

總寬度=（紙箱寬度+上蓋尺寸+下蓋尺寸，即紙板訂購面積=紙張度數*紙張長度）

Total width = (carton width + upper cover size + lower cover size, i.e. paperboard ordering area = paper size * paper length)

2.計算單位面積重量

2. Calculate the weight per unit area

AB板=面紙基重+B板基重*1.36（瓦楞率）+芯紙基重+a板基重*1.51（瓦楞率）+底紙基重

AB board = base weight of face paper + B board * 1.36 (corrugation rate) + core paper base weight + a board base weight * 1.51 (corrugation rate) + base weight of bottom paper

B邊=面紙基重+B邊紙基重*1.36（瓦楞率）+底紙基重

Side B = base weight of face paper + base weight of side B paper * 1.36 (corrugation rate) + base weight of base paper

瓦楞率是瓦楞芯紙消耗紙板長度的描述。不同類型瓦楞紙板的瓦楞率一般為：a=1.51，B=1.36，C=1.44，e=1.31，f=1.23。由于廠家使用的瓦楞輥初始規格不同，機器消耗的紙板也不同，不同機器的瓦楞率也不同。

The corrugation rate is the description of the length of the board consumed by the corrugated core paper. The corrugation rate of different types of corrugated board is generally: a = 1.51, B = 1.36, C = 1.44, e = 1.31, f = 1.23. Due to the different initial specifications of corrugated roller used by manufacturers, the consumption of paperboard is also different, and the corrugated rate of different machines is also different.

3.注意事項

3. Precautions

在實際確認過程中，經常會發現實際重量比計算重量重5-10%，這是由于原紙本身5%的定量差異較大，趨于較高。另一方面，在原紙條件下，含水率相對較低。五層紙板成型后，含水率高于原紙，因此實際重量比較值較原紙重5-10%。我們在計算重量時加上5%的校準值，與實際值接近。

In the actual confirmation process, it is often found that the actual weight is 5-10% heavier than the calculated weight, which is due to the large quantitative difference of 5% of the base paper itself, which tends to be higher. On the other hand, under the condition of base paper, the moisture content is relatively low. The moisture content of the five layer paperboard is higher than that of the base paper, so the actual weight comparison value is 5-10% higher than that of the base paper. We add 5% calibration value to the calculation of weight, which is close to the actual value.

本文的精彩內容來自:瓦楞紙箱廠家更多的詳細內容請點擊我們網站：http://www.je-performance.com感謝您的閱讀，可以對于本文提出您寶貴的意見.

The wonderful content of this article comes from: corrugated box manufacturers. For more details, please click our website: http://www.je-performance.com Thank you for your reading, you can put forward your valuable opinions for this article