10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

　　Some time ago, the small edition of heavy-duty carton manufacturers introduced some questions about the construction and production technology of heavy-duty cartons in customization. After receiving a customer '. Then take this customer consultation question small edition to do a wave of explanation!

　　重型紙箱定制時紙板的厚度不是越厚越好?

　　When the heavy carton is customized, the thickness of the cardboard is not the thicker the better?

　　這個客戶是想做一些高檔的儀器包裝紙箱，所以他們在上一家的廠家定做中，就是用比擬厚實一些的內資料，然后再添加一些比擬好點的裱紙，原本看似十分簡單，打樣也十分美觀順利，但是在實踐做出來的時分，卻十分差強者意，有一種說不出的讓人覺得層次沒這么高的覺得，這是怎樣回事呢

　　First of all, this customer wants to make some high-end instrument packaging cartons, so in the customization of the last manufacturer, they used the thicker internal materials, and then added some better mounting paper, which originally seemed very simple, and the proofing was very beautiful and smooth, but when it was done in practice, it was very weak. There was an indescribable layer I don't think so. What's the matter

　　經過我們重型紙箱廠家?guī)煾祵σ恍悠泛痛筘涀隽吮日罩?，發(fā)現(xiàn)更大的可能性是由于重型紙箱定制的大貨中，內資料被偷龍轉鳳，不曉得處于何種緣由，并沒有上之前打樣的那個200g的芯紙，而是選擇了180g的芯紙，然后再加上外層的有紋路特種紙掩蓋之后，摸起來竟然還真有那么一丟丟難以區(qū)分，但是整體上來看，重型紙箱定制效果的厚度，四面的質量都弱了一些，看起來就不那么像是重型類的包裝，而是一些普通紙箱而已了。

　　After the master of our heavy-duty carton manufacturer compared some samples with the bulk goods, it was found that the most likely reason was that in the customized bulk goods of heavy-duty cartons, the internal information was stolen from the dragon to the Phoenix. I don't know why. Instead of the 200g core paper which was proofed before, I chose 180g core paper, and then covered it with the outer special paper with lines, and then I felt it It's hard to tell if it's too much to throw, but on the whole, the thickness and quality of the customized effect of the heavy-duty cartons are weaker on all sides, so it doesn't look like heavy-duty packaging, but some ordinary cartons.

　　重型紙箱定制時紙板的厚度不是越厚越好?

　　When the heavy carton is customized, the thickness of the cardboard is not the thicker the better?

　　從上面問題也能夠看出來，有時分紙板的質量跟紙板的厚度并不是成正比的關系的，假如選用440g的?？埳a出的5層雙AA坑紙板也比用國產400g生產出的七層3AAA坑的質量要好。所以說定制時的配紙也是視狀況而定的，合適本人產品的包裝才是好的包裝。

　　It can also be seen from the above problems that sometimes the quality of the separation board is not directly proportional to the thickness of the board. If 440G high-quality Kraft linerboard is selected to produce five layers of double AA pit paperboard, the quality of the seven layers of triple AA pit produced by domestic 400g is better. Therefore, the paper matching during customization depends on the situation, and the packaging suitable for my product is a good packaging.

　　好了今天就跟大家講到這里了。以上信息是由重型紙箱廠家：http://www.je-performance.com小編為大家整理分享。

　　OK, I'll talk about it today. The above information is compiled and shared by heavy carton manufacturers: http://www.je-performance.com.