10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

1、 Production equipment

注塑托盤：采用大型注塑機一次注塑成型，產品結實耐用。實芯體，注塑模具可預留鋼管孔，可內置鋼筋增加承載；

Injection tray: large injection molding machine is used for one-time injection molding, the product is strong and durable. Solid core, injection mold can reserve steel pipe hole, can be built-in reinforcement to increase the bearing capacity;

吹塑托盤：采用吹塑機中空吹塑成型，整體一次吹塑成型，節省存儲空間和運輸成本?？招倔w，不可內置鋼筋。

Blow molding tray: blow molding machine hollow blow molding, the whole blow molding, save storage space and transportation costs. Hollow core, no internal reinforcement.

二、工藝不同

2、 The process is different

注塑托盤：注塑是注+壓，注塑做的一定有澆口斷面。

Injection tray: injection is injection + pressure, injection must have gate section.

吹塑托盤：也稱為中空吹塑.吹塑是注+吹。吹塑做的一定有那個拔吹氣管留下的頭。

Blow molding tray: also known as hollow blow molding. Blow molding is injection + blow. Blow molding must have the head left by pulling out the air pipe.

三、表面結構

3、 Surface structure

注塑托盤為網格狀或者平板狀，有加強筋結構。

The injection tray is grid or flat, and has a stiffener structure.

吹塑托盤都為平板狀，內部有支柱結構。

Blow molding pallets are flat, with pillar structure inside.

四、外觀不同

4、 The appearance is different

注塑托盤：注塑托盤是實芯體，托盤表面是光亮的。因為有注塑口，所以成型后的產品會多出一小塊不要的部分，有道工序會把它剪掉，雖然不明顯，如果仔細觀察還是能看見的。

Injection tray: injection tray is solid core, the surface of the tray is bright. Because there is an injection port, there will be a small part of the molded product that is not needed. A process will cut it off. Although it is not obvious, it can still be seen if you carefully observe it.

吹塑托盤：吹塑托盤外觀表面會有吹塑孔，中間全部空置，只能生產雙面托盤，不能生產單面托盤，而且產品進叉使用方向一般是兩向進叉使用。

Blow molding tray: there will be blow molding holes on the surface of the blow molding tray, and all of them are empty in the middle. It can only produce double-sided tray, but not single-sided tray, and the direction of product fork is generally two-way fork.

五、使用環境

5、 Use environment

一般而言吹塑托盤主要在環境惡劣、高強度作業的情況下使用。

Generally speaking, blow molding tray is mainly used in harsh environment and high intensity operation.

而注塑托盤則可以在:平庫、立體庫、冷庫等環境和行業中使用。

The injection tray can be used in flat storage, stereo storage, cold storage and other environments and industries.

六、行業分布

6、 Industry distribution

注塑托盤使用范圍廣，在食品飲料、化工醫藥、煙草紡織，電子汽車、物流等多個行業中使用。自身重量輕，用料省，便宜，受到大家的喜愛。

Injection tray is widely used in food and beverage, chemical medicine, tobacco, textile, electronic automobile, logistics and other industries. It's light weight, material saving and cheap, so it's popular.

吹塑托盤適合惡劣環境，抗沖擊性要求較高的環境。耐低溫性好。適合對托盤的承重要求較高，滿足重型貨物搬運需求。例如重工業，食品冷凍行業等等。

Blow molding tray is suitable for harsh environment with high impact resistance. Good low temperature resistance. Suitable for high load-bearing requirements of pallets, to meet the needs of heavy cargo handling. For example, heavy industry, food freezing industry and so on.

七、優缺點

7、 Advantages and disadvantages

注塑托盤可內置鋼筋，可以上貨架使用，注塑成型精度高。缺點是注塑托盤對料要求高，注塑回收料產品質量比全新料差太多。

Injection tray can be built-in reinforcement, can be used on the shelf, high injection molding precision. The disadvantage is that the injection tray has high requirements for materials, and the quality of recycled materials is much worse than that of new materials.